VIBSTAR VIB3-W-F Vibration Coil Controller

VIBSTAR VIB3-W-F Vibration Coil Controller

The VIBSTAR VIB3-W-F series is a wall-mounted digital controller that drives the coils of bowl and linear feeders using phase-angle technology. Vibration intensity is set with the adjustment knob or a 0–10 V DC analogue signal, and the 4-digit LED display shows the setting clearly.

The digital input allows the load output to be stopped via an NO/NC contact or NO/NC sensor, so feeding can stop automatically when the line is full. Soft start provides smooth starting, while varistor protection and an internal fuse ensure safe operation.

Features

• Phase-angle control with soft start
• 4 A AC or 15 A AC load current (specify when ordering)
• Selectable 110 V AC or 220 V AC load voltage
• Selectable 50 Hz or 100 Hz vibration frequency
• Control via adjustment knob or 0–10 V DC analogue signal
• Stop the load output via selectable digital input (NO/NC contact or NO/NC sensor)
• Maximum and minimum output limits can be set
• 4-digit LED display, on/off switch
• Internal fuse (15 A) and varistor protection against voltage peaks
• Mains cable with plug and motor connection cable; digital input cable optional
• CE marked in accordance with EN standards

Technical data

• Supply: 90–250 V AC, 50/60 Hz (1000 VA for VIB3-W-F, 3800 VA for VIB3-W-F-15)
• Dimensions: 80 × 175 × 60 mm, approx. 400 g
• Protection class: IP20 · Mounting: wall-mounted
• Operating temperature: 0 … +50 °C
• Order code: VIB3-W-F (4 A) / VIB3-W-F-15 (15 A); suffix “-S” for the digital input connection cable

You can download the user manual as a PDF here.

To choose the right control unit for your system, share your vibrator type, coil current and intended use with our technical team.